Computer Cable MCP2IS and CW50 Composite, 250m
Part #: MCP2ISE250
Data Cable, 2 Pair + Earth 2.5mm Earth
MCP2IS is a unique product within Garlands MCP product portfolio. This is a 7/0.25 mm conductor rather than the standard 7/0.20 mm and each pair is individually screened with two individual drain wires. There is no overall screen, just an overall PVC jacket. This product fulfils demand for a number of applications. It can be used as a standard RS-422 product to interconnect computer DTE devices such as printers, scanners, faxes and modems. It can be used as a security cable to connect sensors, motion detectors, IR detectors, reed switches, alarm relays, sound sensors and key pads to alarm control units. It can also be used in intercom and access control systems where a 2 pair cable is required to connect remote devices to the main control panel. Finally, it can also be used as a microphone or line level cable in an audio installation.
| General | |
| Pack Size | 250m |
| Applicable Standards | AS/ACIF S008 |
| Suitable Applications | A range of cables with composite cores have been designed and manufactured to meet individual customer needs. |
| ROHS Compliant | Yes |
| A-Tick (Yes/No) | yes |
| Conductor Characteristics | |
| AWG | 22 |
| Stranding (mm) | 7/0.25 |
| Area (mm2) | 0.34 |
| Diameter (mm) | 0.76 |
| Material | TC |
| Insulation | |
| Material | PP |
| Nominal Thickness (mm) | 0.2 |
| Nominal OD (mm) | 1.2 |
| Drain Wire | |
| AWG | 24 |
| Stranding | 7 |
| Area (mm2) | 0.22 |
| Diameter (mm) | 0.2 |
| Material | TC |
| Screen | |
| Material | Al. Polyester Tape |
| Coverage (%) | 1 |
| Inner Sheath | |
| Material | PVC |
| Colour | GREY |
| Nominal Thickness (mm) | 0.55 |
| Nominal OD (mm) | 5 |
| Outer Sheath | |
| Material | PVC |
| Colour | GREY |
| Nominal Thickness (mm) | 0.75 |
| Nominal OD (mm) | 6.8 x 10.2 |
| Physical Characteristics | |
| Insulation – Elongation at BBA | >150% |
| Outer Sheath – Elongation at BBA | >100% |
| Tensile Strength Before Aging | >12MPa |
| Electrical Properties | |
| Max. Conductor DC Resistance @ 20°C | 55Ω/km |
| Min. Insulation Resistance @ 20°C | 1,000MΩ.km |
| Voltage Test: Conductor to core | 1.5 kV ac/1min |
| Voltage Test: Core to sheath | 3.0 kV ac/1min |
| Mechanical Properties | |
| Operating Temp Range | -15 to 70°C |
| Max. Recommended Pulling Tension | 267N |
| Min Bend Radius (Install) | 68mm |
| Approximate Mass(kgs/100m) | 11.35kg/100m |
Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.