Data Cable, 24 AWG, Cat5e, 4 Pair Screened FTP, PVC, 500m Grey
Part #: FTP5EGY500
24 AWG Solid Bare Copper Conductors, Polyolefin Insulated, Twinned, Cabled, Overall Aluminium Laminate Screened, PVC Jacketed, Category 5E FTP Cable for Structured Wiring Systems.
Foil Twisted Pair (FTP) LAN cable is used in environments where there is concern over electrical noise either effecting the cable, or radiating from the cable.
Garlands FTP5E product is constructed to address these concerns. With an overall screen of laminated aluminium and polyester and an integrated drain wire, this product offers improved EMI and EMC performance. Ideally suited to sensitive applications such as in Hospitals, Embassies, Consulates, Government and Industrial LAN environments, Garland’s FTP5E uses an oversized 0.54 mm conductor to provide excellent attenuation performance in a standard Cat5E LAN cable.
Please note that in order to perform to their full potential, FTP products should be properly grounded thru appropriately designed screened connectors and jacks.
General | |
Pack Size | 500m |
Applicable Standards | AS/ACIF S008, TIA/EIA 568 C.2 |
Suitable Applications | Used in Structured cabling for computer networks such as Ethernet. |
ROHS Compliant | Yes |
A-Tick (Yes/No) | yes |
Conductor Characteristics | |
AWG | 24 |
Stranding (mm) | 1/0.542 |
Area (mm2) | 0.23 |
Diameter (mm) | 0.542 |
Material | BC |
Insulation | |
Material | PE |
Nominal Thickness (mm) | 0.23 |
Nominal OD (mm) | 1.025 |
Drain Wire | |
AWG | 26 |
Stranding | 7 |
Area (mm2) | 0.14 |
Diameter (mm) | 0.16 |
Material | TC |
Screen | |
Material | Al. Polyester Tape |
Coverage (%) | 1 |
Outer Sheath | |
Material | PVC |
Colour | GREY |
Nominal Thickness (mm) | 0.6 |
Nominal OD (mm) | 6.5 |
Physical Characteristics | |
Insulation – Elongation at BBA | >300% |
Outer Sheath – Elongation at BBA | >100% |
Tensile Strength Before Aging | >13.8MPa |
Electrical Properties | |
Max. Conductor DC Resistance @ 20°C | 93.8Ω/km |
Max. Mutual Capacitance @ 1KHz | 56 pF/m |
Max. Pair-pair capacitance unbalance | 330 pF/100m |
Nom. Characteristic Impedance @ 1MHz | 100±15% |
Min. Insulation Resistance @ 20°C | 1,000 MΩ.km |
Voltage Test: Conductor to core | 1.5kV ac/1min |
Voltage Test: Core to sheath | 3.0kV ac/1min |
Mechanical Properties | |
Operating Temp Range | -15 to 70°C |
Max. Recommended Pulling Tension | 129N |
Min Bend Radius (Install) | 65mm |
Approximate Mass(kgs/100m) | 4.8kg/100m |
Supply Information | |
Supply Information – Pack Type | Wooden Reel |
Dimensions | W40 x 26.8cm |
Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.